Phantom Hidden Fasteners are backed by a 20-year limited residential warranty and a 5-year limited commercial warranty. For details, see complete warranty information. Seven Trust approved fasteners are designed to accommodate normal dimensional changes without material fracture or change in holding capability and are recommended for installation of Seven Trust decking products.
Enhance composite decking is made from 95% recycled content and is easy to cut and drill with standard tools. Composite decking is made from a mixture of wood fibers and plastic polymers. It requires less maintenance than wood and resists cracking and fading. To keep from marring the look of the deck, we used Seven Trust Hideaway hidden deck fasteners, which allow you to put the decking down without visible screw holes.
Composite decking handles much like wood, although you can't sand it. It accepts screws and nails, but the best way to attach it to the deck frame is to use a hidden fastener system. To do so, you need boards with grooves into which to hook the fasteners.
Steps: 1. Measure the deck for the first decking plank. 2. Cut the plank to length with a circular saw or power miter saw. 3. If necessary, use a jigsaw to cut a hole in the plank for the downspout. 4. Set the plank onto the deck, and use a putty knife to slip it under any existing metal
How to Build a Deck: Composite Decking and Railings. Once all the posts are secured you can install the decking. For a cleaner look, use hidden deck clips and grooved composite boards. If you deck will have parting boards running down the middle, install decking on either side of the bracing you installed to support them. leave a 1-1/4
Pick a fastener that can be used with grooved boards. Some hidden fasteners dont work with deck boards that have a groove on the sides. You must use a hidden fastener thats approved for the type of decking youre going to use. Choose hidden fasteners that allow you to remove an individual board that has been damaged.
Line up the seams over double joists. To install composite decking with a hidden fastening system start at the house by face screwing the first board. Next screw a hidden fastener clip into the groove on top of each joist. Then slide the groove of the next board into the clips and tighten with a rubber mallet.
Seven Trust Hideaway Hidden Fastening System. When using grooved-edge boards, our hidden deck fastening system installs between the deck boards, fastening them to the joists with no visible deck screw heads on the walking surface. This precision also creates perfectly consistent spacing between the boards for a flawless look across the entire deck.
Decking Installation: how to place, space, and fasten deck boards Western red cedar, and tropical hardwoods. Composite decking can usually be installed with galvanized fasteners, but it is smart to check with the manufacturer. "Secrets of the Pro's", Tiger Claw Hidden Deck Fasteners, Tiger Claw Inc., 400 Middle Street Suite J, Bristol
If you are looking for How to Install Hidden Deck Fasteners on Composite Deck Then you have come to the right place Here i will show you some quick steps on getting your new deck looking nice a
Composite decking can be fastened to treated wood joists with screws or with hidden fasteners. Using composite deck screws is critical because they are specially designed to help hold the material in place.
Cortex Hidden Fastening System Removing a Cammed-Out Deck Screw. It is important that the Cortex screw is driven perpendicular to the deck, with two screws per joist. The setting of the Cortex screw creates a cored hole in the deck surface. Place the Cortex engineered plug into the hole with the deck surface side up. Gently tap the deck plug into the cored hole until the plug is flush with the deck surface.
The newest development is composite decking systems that come grooved for a proprietary clip from the manufacturer. Seven Trust and other hardwoods may be available locally with similar grooves milled in. As with nearly any product, some users get good results, and others don't. Below are a few things to consider, to make the most of hidden fasteners
You can attach all the decking boards with screws if you prefer to avoid hidden fasteners. Use composite decking screws. They have a flat head that bites into the composite material and sinks